How much weight is each ladder designed for?
When mounted securely and properly to the dock/pier structure, the ladder will hold 500lbs.
What size are the steps?
Each step is approximately 24.5″ wide and 6″ deep.
How far does it drop into the water?
There is approximately 11″ between steps. Every dock is different, so we can’t be exact due to water level and float size.
How heavy are the WetSteps? Can I lift them out of the water?
Since they are all aluminum construction, they are very easy for young and old to lift out of the water. The 5-step ladder is 34lbs, and is considerably lighter than steel and wooden ladders.
Will my ladder stay looking new?
Just like a pontoon boat, when aluminum is left in the water, it will discolor. You will see a water line unless you use a clear coat aluminum protectant prior to use. We offer the coating for an additional charge or pick a color and let us powdercoat it for you!
Can it be taken out of the water for storage?
Yes. Simply rotate it out of the water when not in use.
Is it difficult to install?
No, it requires only 8 bolts to be attached.
Is there an easier way to mount the ladder to a cement tile dock?
Yes. We now have a rubber coated, gray steel deck plate that replaces two cement tiles. It bolts directly in, so it only takes minutes to install both the ladder and plate.
Should I leave it in the water when not in use?
No. It is recommended to remove it from the water when not in use to prevent algae, barnacles, etc. from growing. These types of build-up can make any step slippery, so take it out of the water to keep it clean.
Does it rust?
All metal oxidize; however, unlike other metals, aluminum performs extremely well in water. It is highly recommended to remove from water when not in use since freshwater can grow algae.
Is there any kind of warranty?
All Wet Steps dock products have a 10 year warranty on the construction.
Can I still pull a boat up alongside my dock?
Yes. WetSteps easily lift completely out of the water to free up boat parking at a moment’s notice.